Basic Info.
Control Mode
Collective Selective Control
Elevator Door
Center Opening Door
Buffer Device
Energy Consumption
Deceleration Device
With Deceleration Device
Transport Package
Plywood Box
Product Description
Cell/:0086-15967346547
FUJI Car Lift/ Car Elevator with Large Space
Advantage
1. Our elevator control system comes from Germany technology, it is very precise and efficient but operation is simple, it can be mastered by engineers easily.
2. Qualified and safe
3. Steady and durable use
4. ISO9001(quality management system) and ISO14001(environment management system) certifiicated
5. Competitve price
6. Best support in afterservice
CAR ELEVATOR PARAMETERS
Load(kg) | Speed(m/s) | Door open type | Car size(mm) C.W x C.D | Door open size(mm) | Hoist-way size(mm) H.W x H.D | Machine room size(mm) | Pit depth(mm) | Overhead height(mm) |
3000 | 0.5 | Center opening double-folded | 2200x2550 | 1800x2200 | 3300x3050 | 3300x4200 | 1600 | 4600 |
Double-folded side opening | 3150x3050 | 3150x4200 |
5000 | 0.25 | Center opening double-folded | 2500x3500 | 2400x2200 | 4000x4000 | 4050x5000 | 1600 | 4600 |
0.5 |
Standard functions
Safety function | Photocell protection | l In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects. |
Designated stop | l If the elevator can not open the door in the destination floor out of some reason, the elevator will close the door and travel to the next designated floor. |
Overload holding stop | l When the car is overload, the buzzer rings and stops the elevator in the same floor. |
Anti-stall timer protection | l The elevator stops operation due to slippery traction wire rope. |
Start protection control | l If the elevator does not leave door zone with in the designated time after it gets started, it will stop the operation. |
Inspection operation | l When the elevator enters into inspection operation, the car travels at inching running. |
Fault self-diagnosis | l The controller can record 62 latest troubles so as to quickly remove the trouble and restore the elevator operation. |
Repeated door closing | l If the elevator can not close the door due to certain obstacle or interference, the elevator will reopen or re-shut the door until sundries are eliminated. |
Up/down over-run and final limit protection | l The device can effectively prevent the elevator from surging to the top or knocking the bottom when it is out of control. It results in more safe and reliable elevator travel. |
Down over-speed protection device | l When the elevator downs 1.3 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running. Safety tongs act to force the elevator stop in order to ensure the safety. |
Upward over-speed protection device | l When the elevator up speed is 1.3 times higher than rated speed, the device will automatically decelerate or brake the elevator. |
Man-computer interface | Micro-touch button for car call and hall call | l Novel micro-touch button is used for operation panel command button in the car and landing calling button. |
Floor and direction indicator inside car | l The car shows the elevator floor location and current travel direction. |
Floor and direction indicator in hall | l The landing shows the elevator floor location and current travel direction. |
Emergency function | Emergency car lighting | l Emergency car lighting automatically activated once power failure. |
Inching running | l When the elevator enters into emergency electric operation, the car travels at low speed inching running. |
Five way intercom | l Communication amid car, car top, elevator machine room, well pit and rescue duty room through interphone. |
Bell | l In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell on top of the car will ring . |
Fire emergency return | l If you start key switch in main landing or monitor screen, all the callings will be canceled. The elevator directly and immediately drive to the designated rescue floor and automatically open the door. |
Energy-saving function | Car ventilation, automatic lighting switch | l If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy. |
Remote shut-off | l The elevator can be called to main landing(after finishing the service) through the key switch and automatically exists the service. |
FAQ
1. What's the necessary information should be provided before purchasing an car elevator?
1).How many loading capacity you need? (3000kg, 4000kg, 5000kg)
2).How many floors does the elevator travel?
3).What's the shaft size? Shaft width and shaft depth?
4).Is there a machine room on top of the shaft?
When we get the answers, we can design exact elevator and make an quotation to you.
2. What advantages your elevators have?
We use the best parts for our elevators, gearless motor from xizi Otis, door operator from Shenling or Wittur, control system from Monarch or STEP etc. All these parts from the biggest and the best suppliers in the world. Actually, elevator is an assembled product, like iphone. And we control the design, control system, and the parts quality and delivery. Our strict management make sure the elevator can be installed without any problem and all parts will be fixed in the correct position, our design make sure the elevator can run stably and efficiently.
3. What about your price level?
Our price is in the middle level in market. We are not OTIS, not KONE, not Mitsubishi, so our price is much lower than theirs, however, we want to make good enough elevator and escalator, so we use the best parts from the best suppliers to guarantee the quality, that means our cost is not low, so we can't give price so low as the other elevator suppliers. You can find out lower price than ours in the market. So all of our clients are middle level people or companies, they like lower price but not dreed, they require good quality and not limit.
4. How to do the elevator installation and maintenance?
Normally, local people can do that job with our provided manuals and technology support. You can ask the local professional elevator engineers or technician to install elevators for you, that's the long time solution. You can also ask our engineers to go to your site to do that job but the cost will be much higher and maintenance job will be still given to local people for the rest time after installation. Remember that installation is the most important. Even if the elevator quality is good enough, but the installation is bad, then the elevator will run with many problems.
5. How to do for passengers when elevator power is off suddenly?
In case of power failure, elevator stops. The passengers can press the Alarm bell button inside cabin. And the maintenance people should come, make the elevator stop in level and open the door. Of course, you can also buy an ARD or UPS device with the elevator, then it can make the elevator stop in level and open the door automatically. It can save time and reduce the fear for the passengers inside the elevator.
Address:
Huzhou, Zhejiang, China
Business Type:
Trading Company
Business Range:
Construction & Decoration, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Office Supplies, Service, Transportation
Management System Certification:
ISO 9001, ISO 9000, ISO 14001
Company Introduction:
FUJI Group, founded in 1948 by Shotaro Uchiyama, is one of the few professional manufactures in elevator circle, and a globally transnational enterprise engaged in spatial moving system such as elevator, escalator, autowalk, and solid parking equipment. It carries out sales activities in 22 states and areas including Japan, China, East Asia, South Asia, Europe, North and South America; Besides, it has 12 manufacturing base to provide reliable products and services globally. By virtue of the innovative technology and high quality commended by clients, it makes continuous contribution to the city development of global states and areas, thus wins the good reputation of "Worldly Elevators-FUJI lift ".
FUJI has always being devoted to the globalization development of its business, and centers its global development strategy in China. In 1985, FUJI Group marched towards China market, as well as cooperated with Chinatex Corporation to establish FUJI lift Co., Ltd in 2002 respectively. Thus has formed a three in one service layout of research and development, manufacture, and supply.
FUJI lift welcome the qualitied partners join as a membership to have a win-win cooperation.